How to Repair a Hair Clip with a Detached Spring

Written By: Evelyn Saravia
  • Comments: 0
How to Repair a Hair Clip with a Detached Spring

Difficulty

Very easy

Steps

6

Time Required

8 minutes

Introduction

If your favorite hair clip broke in half, use this guide to repair your hair clip by reattaching the spring. Repairing your hair clip will allow you to make the clip fully functional, reduce plastic waste, and wear your favorite hair clip again!

  1. wfI2EdOI1gBPUvgY
    wfI2EdOI1gBPUvgY
    6jQv2StPhKXh2jKk

    • Place the two pieces of the hair clip together.

    • The circles on the top of the clip should align.

  2. XxyVGvKQ2c2f2DUr
    XxyVGvKQ2c2f2DUr
    quVQOKUGMH5UYr3l

    • Tie the rubber band around the hair clip to secure the pieces in place.

  3. 1J2wLAYSwdP6eFHP

    • Insert the pin halfway into the circles on the top of the clip.

  4. Vt4vQj52xyIMCZYt

    • Place the spring next to the inserted pin with the two edges facing upwards.

  5. iHiOBHpmJ1doSmFL

    • Use the pliers to push the pin through the spring and remaining holes.

  6. FXQ2EEmWbD6QHTIf
    FXQ2EEmWbD6QHTIf
    HobltDVWoFdru3Ia
    H66A5ZwoxIqrcQNG

    • Take the rubber band off and test the repair.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Evelyn Saravia

Member since: 11/10/21

133 Reputation

0 comments