How to Restore a Torn Nike Flip-Flop

Written By: Adrian Yearby

Comments: 2

Difficulty

Easy

Steps

Time Required

2 days

Introduction

Nike Flip-Flops are a very common item in a person's wardrobe. Using these Nike Flip-Flops constantly causes wear and tear, which could be dangerous to the person wearing them. As the flip-flops tear they become unstable and can cause foot injuries like a sprained ankle. This guide will help protect you feet, by fixing the torn parts and making the Nike flip-flops more stable.

Tools

Step 1

Remove all rough edges with 120 grit sandpaper from the torn parts of the flip-flop.

Step 2

Clean off any additional residue with soap, water, and a towel or toothbrush.
Allow the flip-flop to air dry before moving on.

Step 3

Gently apply the adhesive on the torn parts of the flip-flop.
Make sure the torn parts are completely covered. Overspill is okay.
Connect and hold the parts of the flip-flop to the adhesive with your hands for 5 minutes. After the 5 minutes the adhesive will be hard enough to let it sit. Let the adhesive dry for 24 hours.
Be sure to wear gloves and be in a ventilated environment when applying the adhesive.

Step 4

Once the adhesive is dry remove any extra adhesive that might have spilled over with the sandpaper.

Step 5

Take the needle and thread and begin to sew a cross stitch from the strap to the torn part of the flip-flop.
It may be easier to use an upholstery needle to get through the rubber material.