How to Sew a Whip Stitch

Written By: Brittany McCrigler
  • Comments: 0
How to Sew a Whip Stitch

Difficulty

Easy

Steps

7

Time Required

5 - 10 minutes

Introduction

A whip stitch is an easy way to sew two pieces of fabric together. You can use this stitch whether the edges of the two pieces of material line up or not. If they do line up, the stitch will loop around the outside edge of the material.

  1. 2KgBkuPgGpBtaeIs
    2KgBkuPgGpBtaeIs
    4IrnOJN4slvwb3px

    • Align the two pieces of material you will be stitching together.

    • Thread your needle and tie a knot in the end of the thread.

    • We'll use a bright-colored thread for better contrast, but you may want to select a thread that matches the color of your fabric.

    • Drive the needle into the bottom layer of material from the back side.

  2. TQSJF5UKyFHTDA3G
    TQSJF5UKyFHTDA3G
    KEWsZGF4SerJvOGm
    DvqikjXT2fChCrA5

    • Pull the needle through the bottom layer of material.

    • Pull the thread taut.

  3. CiqRhf25JvOM6Z2A
    CiqRhf25JvOM6Z2A
    eTfDRJ6ZMAvEYKf6
    xkdxVeXioN4Gicia

    • Drive the needle down through the top and bottom layers of fabric, close to where the needle came up.

    • The distance between where the needle comes up and goes down will be your stitch length. The smaller the stitch length, the more stitches required—and the stronger the seam.

    • Pull the thread taut on the backside of the bottom material.

  4. QEJfbgdCxnIS2BoL
    QEJfbgdCxnIS2BoL
    4VSt3vSSyxwRS5SG

    • Continue bringing the needle up and down through both layers of fabric, as in steps 2 and 3 of this guide, working your way around the material.

    • If you are using this stitch as a repair where a stitch already exists, be sure to overlap the existing stitching by several stitches to help prevent it from unraveling.

  5. bsgwlogOHYL3aauU
    bsgwlogOHYL3aauU
    iJvtA5hGuFWi6jHd

    • For the final stitch, come up from the back of the bottom material once again.

    • Draw the needle between the two layers of material through the stitch closest to where the needle came up.

  6. qgVLXtf3MFyPkiWu
    qgVLXtf3MFyPkiWu
    dN52koE2vRNWJty4
    ptQg5OwJgkZG51BH

    • Slowly start to pull the thread taut. As you pull, you will see a loop form.

    • Draw the needle through the loop.

    • Pull the thread taut, forming a knot.

    • Repeat the process of driving the needle up from behind, drawing it through the stitch, and pulling it through the loop as described in steps 5 and 6 of this guide one more time.

  7. pDW4RpOwtSOg3ROK

    • Ensure that the stitches are tight.

    • Cut any remaining thread, and admire your handiwork.

Author

Brittany McCrigler

Member since: 05/03/12

88098 Reputation

0 comments