How to fix wobbling Steering wheel on the Logitech G29 Driving Force

Written By: Nathaniel Hyder
  • Comments: 0
How to fix wobbling Steering wheel on the Logitech G29 Driving Force

Difficulty

Moderate

Steps

6

Time Required

10 - 15 minutes

Introduction

This guide is for tightening and correcting a loose steering wheel on the Logitech G29 Driving Force. This part of the device also replaces the controller for the associated gaming system, so making sure it is working as well as possible is integral for peak gameplay.

  1. EyDcBxuhCSYPrYtm

    • Undo the screws on the back of the steering wheel that connect it to the device hub.

  2. uIlRGuSaxKkjFWap

    • Remove the 6 bolts on the faceplate of the steering wheel.

  3. uT4uqeIJDWn6IPPi

    • CAREFULLY separate the steering wheel from the base of the device.

    • Gently remove the wire connector from the steering wheel and remove the steering wheel completely.

  4. TMWLrxERVmdJvyWy
    TMWLrxERVmdJvyWy
    g1jIYEdVTZDKIjfw

    • Remove the three screws from the locations circled

    • Remove the paddle shifter from the device.

  5. Onsyq6qOghSElBZP
    Onsyq6qOghSElBZP
    MmvpPQmLXbJFKbNU

    • After removing the steering wheel and paddle shifter, flip the device hub over and remove the 8 screws highlighted in red.

    • After the screws are removed flip the hub back over and remove the black casing to reveal the inside.

  6. kO3xrXjw6F1RVNWo

    • Ensure that the black plastic and the metal frame of the device are as close together as possible

    • Tighten the 4 screws highlighted in orange. This should fix the wobbling issue on your device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Nathaniel Hyder

Member since: 16/09/22

133 Reputation

0 comments