How you can fix a zipper in places like a pocket.

Written By: Daniel Schmid
  • Comments: 0
How you can fix a zipper in places like a pocket.

Difficulty

Moderate

Steps

4

Time Required

10 minutes

Introduction

It can happen that the zipper slips over the end. We will show you here how you can easily thread it again and sew the ends together so that this does not happen again.

  1. ZXwS4YOSV1lEyw3r

    • You’ll need scissors, matching thread and a sewing needle.

  2. hoZxHy2VlMN1mqen

    • Pull the zipper slider all the way down to the bottom of the zipper.

  3. From the bottom, slide the zipper back over both tracks.

    • From the bottom, slide the zipper back over both tracks.

  4. Sew both tracks of the zipper together where the teeth of the zipper end, tie a knot and cut off of the tail of the thread close to the knot.

    • Sew both tracks of the zipper together where the teeth of the zipper end, tie a knot and cut off of the tail of the thread close to the knot.

Conclusion

Finished! You did it.

Author

Daniel Schmid

Member since: 22/02/16

327 Reputation

0 comments