Huawei P8 Lite Loud Speaker Replacement

Written By: Dominik Schnabelrauch

Comments: 11

Difficulty

Moderate

Steps

Time Required

5 - 10 minutes

Introduction

Use this guide to replace the loudspeaker on your Huawei P8 Lite.

Tools

Step 1

Use an Opening Tool and start to lever up the back cover of your Huawei P8 Lite at the bottom of your phone.

El celular no tiene ese tipo de tapa es como sellada, que debo hacer para saber si es por la pila que no agarra carga porxa

maguada1106 - 30/05/21

Wenn man langsam langsam arbeiten und vorsichtig ist, dann kein problem gibt es.Ich hätte keine Problemen zu öffnen.Das ist sehr leicht.

Athanasios Georgopoulos -

Step 2

There are clips around the whole mid frame, holding down the back cover. Open all of them with the Opening Tool.
When all clips are open, remove the back cover from the rest of the phone.
If the back cover doesn't come freely, there are probably some additional clips that need to be disconnected.

The back panel is really really easy to brake, be careful :)

romaingauthier - 17/03/18

In my mobile phone the back panel was kept in place also from 2 strips of bi-adhesive tape. Pull gently to detach it to remove the panel.

beppe modolo - 13/01/19

right. it has 4 strips of adhesive tape

Miguel Cretu - 24/07/19

To facilitate the detachment of these double-sided tapes, I recommend heating with a hairdryer along the edges of the back cover, especially at the four corners.

Nicola - 04/02/21

Step 3

Use a tweezer to remove the warranty sticker which sits on a screw in the bottom right of your phone.

The 4 screws wich hold down the lower part of the loudspeaker are Torx screws for me. But it's a French Huawei, doin' nothing like the others :)

Christopher Hourlier - 12/09/17

Die Wasserschadenindikatoren sitzen unter dem Mainboard. Bei den Aufklebern auf den TORX handelt es sich um Garantiesiegel.

Andre Richter - 25/04/18

Danke für den Hinweis, wurde so übernommen.

Dominik Schnabelrauch - 26/04/18

pour dévisser les vis cruciformes, quel taille de tournevis faut il? svp

blan - 08/07/18

Bonjour, il vous faut un tournevis ou un embout cruciforme #00 pour dévisser une vis cruciforme #00. Bonne réparation !

Claire Miesch - 09/07/18

Step 4

Remove the 4 black Torx T5 screws which hold down the lower part of the loudspeaker.
Remove the three silver Phillips #00 screws which hold down the upper part of the loudspeaker.