Introduction
This guide will document the process of upgrading or replacing memory in a Lenovo X200 laptop or tablet.
Tools
Parts
-
-
1. Unscrew the two phillips #1 size screws that hold the panel to access the two memory modules.
-
-
-
Note: If only one DIMM is used on the computer, the card must be installed in SLOT-0 ( a ), not in SLOT-1 ( b ).
-
Remove DIMM by gently spreading the socket connectors up and down as shown in the direction of the arrows and pull the DIMM out.
-
Insert the notched end of the DIMM into the socket.
-
Press the DIMM firmly, and pivot it until it snaps into the place.
-
Make sure that it is firmly fixed in the slot and does not move easily.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
