Lenovo Yoga Tab 3 10 Camera Replacement

Written By: Phanudej
  • Comments: 7
Lenovo Yoga Tab 3 10 Camera Replacement

Difficulty

Moderate

Steps

9

Time Required

No estimate

Introduction

  1. TFCqsMnEXfVtFqHT

    • Open the built-in kickstand.

  2. Tl2Pfk4toNRLpZ5A
    Tl2Pfk4toNRLpZ5A
    CFbtiXi3pgk6vwtR
    oJdGFSBDZrIXmsXe

    • Remove the sticker located directly under the the built-in kickstand to reveal two 0.75 mm screws.

    • Remove the microSD card slot cover. Remove any microSD card (if inserted).

    • Using a Phillips head screwdriver, remove the three 0.75 mm screws.

    On 3 plus model the third screw is not under microSD card but rather under a small sticker on the right side. Plus has longer battery.

    George -

    on the Tab 3 plus , the third screw is not under the sd card but a little further over under another sticker and is painted white

    dan o brien -

  3. yVF45qKSubHrYrZH
    yVF45qKSubHrYrZH
    4RGONwjDhHHduEnv
    UIJQgTfd6e12AOcU

    • Orient the device so the screen is facing you.

    • Carefully insert the spudger along the seam between the screen and back cover and gently separate the back cover from the device frame.

    • Continue to detach the backplate from the frame by moving the spudger around the perimeter.

    • Some force will be required to detach the small plastic braces securing the backplate to the device.

    On some models there is glue pad under the sim/sdcard tray.

    Ervins Stepanovs -

    Ein Hinweis auf den Federrahmen an der Kamera wäre nützlich. Er ist sehr empfindlich. Ich habe ihn beim Öffnen zerstört und jetzt stellt die Kamera nicht mehr scharf.

    Thomas Spieker -

    Hallo Thomas, tut mir leid, dass deine Kamera nicht mehr schart stellt. Aber die Anleitungen funktionieren wie Wikipedia: Wenn du mehr Infos hast, stelle sie gern allen anderen zur Verfügung!

    Fabian Neidhardt -

    (at least on the Plus model) the most difficult plastic clips are near the micro-SD/SIM. So it is easier to release the other side, where the camera not is. or pull the casing "down" towards the battery/stand.

    Hans Wurst -

  4. vvKcRgPfChcjfmjD
    vvKcRgPfChcjfmjD
    dlh3IwQRVcb22ipB
    DOxuPTdgYP21OVgw

    • Remove the 3 screws from the auxiliary port cover.

    • Use the spudger to gently push the auxiliary module out of the way.

    • Remove the detachable plastic latch located in front of the hinge.

  5. oyOqOSKacFZc2qMe

    • Use a spudger to gently remove the hinge.

  6. LOWUg3NAPLf6TLKy

    • Carefully lift the kickstand away from the frame.

    • The battery is located inside of the kickstand. Ensure proper handling and care.

  7. G11o6xRqNQDHOHJF
    G11o6xRqNQDHOHJF
    SAgPXoEZWCEVPnxj

    • Use the pointed end of a spudger to push in the camera's locking mechanism.

    • Upon releasing the camera lock lift the camera out and locate the three screws.

  8. m4TRvsKIykINIW2w
    m4TRvsKIykINIW2w
    cuyZBAh1uNabxy1L
    huEguug2yfPlvYBF

    • Use a J000 Philips screwdriver to remove the three screws.

    • Remove the camera cover that seals the camera case.

    • Remove the camera from the shell.

  9. ZpWM1y5yF1wXZ1Si

    • Separate the camera from its casing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Phanudej

Member since: 20/02/17

1166 Reputation

One comment

Thanks for describing in details with bit and peaces very neatly and clearly. I fix the problem of my Lenovo Yoga 3 with help of this. Great job you have done.. keep it up… Sisira

Sisira Kumara -