Introduction

Internal Prerequisite. Removing the battery after the fan is gone.

  1. 4aK3NiUcOJIxGQP4
    • Remove the following five screws securing the battery to the upper case:

    • Three 6.3 mm T5 Torx screws

    • Two 2.4 mm T5 Torx screws

  2. BD6VIWaSPGtWOstE
    • When handling the battery, avoid squeezing or touching the four exposed lithium polymer cells.

    • Lift the battery from its edge nearest the logic board and remove it from the upper case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Walter Galan

685251 Reputation

0 comments