MacBook Air 13" Retina Display 2019 Trackpad Cable Replacement

Written By: Adam O'Camb
  • Comments: 0
MacBook Air 13" Retina Display 2019 Trackpad Cable Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

Prerequisite-only guide to replace the trackpad cable in a 2019 MacBook Air.

  1. 6KlbC5YMuwIl1xag
    6KlbC5YMuwIl1xag
    dyjgWbYsxppIcXpC
    CsanNaDXlvspYfCS

    • Carefully slide an opening pick under the trackpad cable to separate the adhesive securing it to the upper case.

    • If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer to soften the adhesive.

  2. aAjFcxQgcYYQJHs5
    aAjFcxQgcYYQJHs5
    h1CD4iMuvXUr3Df2
    4kS6CEPwNGajdbXT

    • Use the flat end of a spudger to lift the small locking flap on the trackpad ZIF connector.

    • Slide the trackpad cable straight out of its connector.

  3. TcqNE6KcGbJbK2LL
    TcqNE6KcGbJbK2LL
    HftlAiCONfDIPA1p

    • Carefully slide an opening pick under the trackpad cable to separate the adhesive securing it to the battery.

    • If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer. Be careful not to overheat the battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Adam O'Camb

Member since: 11/04/15

178619 Reputation

0 comments