MacBook Pro 17" Unibody Hard Drive Replacement

Written By: Andrew Bookholt
  • Comments: 2
MacBook Pro 17" Unibody Hard Drive Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

  1. NWWkEGjVodDiTIdn

    • Remove the two Phillips screws securing the hard drive bracket to the upper case.

    • These screws are captive to the hard drive bracket.

    The screws are NOT captive to the bracket.

    Stephen -

    on my 2009 A1297 the screws are captive.

    Lucienp -

  2. gcWn3CNLDMXpifaQ

    • Remove the hard drive bracket from the upper case.

  3. WbYPOOHqPqYPbnPA

    • Use the hard drive's pull tab to lift it out of the upper case.

    • Don't try to completely remove the hard drive just yet! Its cable is still connected.

  4. GNdWTDbMd4IgwXYO
    GNdWTDbMd4IgwXYO
    SQbJHkLNyu1nLxlg

    • Pull the hard drive connector away from the body of the hard drive.

    • Remove the hard drive from your MacBook Pro.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Andrew Bookholt

578096 Reputation

0 comments