Introduction
If your dryer makes some noise when running it, it may time to replace the filter of your Manatee V2S Intelligent Clothes Dryer. This guide gives step by step instructions for replacing the filter of your dryer.
-
-
Use a Phillips #0 screwdriver to remove the 3.5 mm screw holding the bottom case to the device.
-
-
-
Cut out about 10 cm of scotch tape.
-
Turn it over and go around your hand as shown in the image, which lets the adhesive side on the outside. (Because it is easy to remove dust)
-
-
-
Take out the filter.
-
Tap the dust and particles into the garbage, remove the dust with scotch tape, or replace the filter.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
