Introduction
If, like mine, the key head is broken and the key is therefore somewhat impractical to use, these instructions can help you.
Tools
Parts
-
-
In my case, the original cast key head tore and is therefore no longer stable, which made it somewhat impractical to use.
-
-
-
In the first step we need to remove the old potted key head. This works best with a sharp knife (cutter knife)
-
-
-
Now we take the new key head and insert the key.
-
If it's a bit difficult to get in, you can press down with something flat, like a slotted screwdriver.
-
-
-
If your key, like mine, is not straight but semi-circular, the fastening wedge must be adjusted. See Figures 2 and 3 for this
-
-
-
Now we are at the last step and it is very simple. Because you only have to insert the fastening wedge and the key head renewal is complete
-
I hope this guide has helped you.
