Introduction
Almost every watchmaker from Casio to Rolex produces watches with link bands. When adjusting or repairing a band becomes necessary, adding and removing links with a few special tools is the only solution. This comprehensive guide will demonstrate how to properly perform such manipulations on a Michael Kors brand wristwatch.
Tools
-
-
Place the watch on your wrist and determine whether links should be added or removed.
-
If watchband needs to be expanded, approximate the number of links required.
-
-
-
Set the watch on the block holder.
-
Ensure the arrows located on the links are pointing downward.
-
-
-
When removing damaged or extra links, hold one end of the pin pusher against the pin to be removed.
-
Strike the other end of the pin pusher with the metal side of the watch hammer until the pin slides out.
-
-
-
To add links to the watchband, position the watch on the block holder with the arrows facing upward.
-
Insert pins into the holes that connect the new link to the rest of the watchband.
-
Use the soft side of the hammer to strike the pin down.
-
To reassemble your device, follow these instructions in reverse order.
9 comments
How do I replace a broken link when it's the very first link that connects the band to the actual watch?
How can I puchace the first link on my Michael kors ceramic watch
I need first link to attach to micheal kors ceramic white watch
The lady when I bought my watch at the mall told me that Michael Kors will give you two free links I'm trying to figure out how I can go about getting that
Where can I get the white bands that cover the links on my my watch as a few have bits broken
I need 1 or 2 linked added to my Michael kors watch
Jeremy Bendy -
I need 2 silver band
pansy parsons -