Moto C Daughterboard Cover Replacement

Insert a thumbnail, or spudger, into the notch on the bottom right corner to start separating the phone unit from the back cover.

Move it to the bottom left corner and pry the phone unit out of the back cover until you can get a good grip.

Lift the phone out of the back cover.

Use a finger or spudger to lever the battery out of its recess and remove it.

Remove the four 3.5 mm long Torx T5 screws.

Apply the edge of an opening pick to the bottom right corner under the daughterboard cover.

Twist the opening pick to open the plastic clamps of the daughterboard cover.

Slide the opening pick to the left and pry it upwards until you can get a good grip on the daughterboard cover.

Remove the daughterboard cover.