Introduction

Use this guide to remove and replace a worn out battery in the Motorola Moto C Plus.

  1. RKUGTbjtiQMrpt1c
    RKUGTbjtiQMrpt1c
    4wJ4m5lwg5XxKpjw
    EOVLDjWqdqGBQsxv
    • Power off your phone before beginning disassembly.

    • Insert a thumbnail, or spudger, into the notch on the bottom right to start separating the phone unit from the back cover.

    • Move to the bottom left corner and pry the phone unit out of the back cover until you can get a good grip.

  2. TQ2xL5KeXZJadINA
    TQ2xL5KeXZJadINA
    IbmbjRYyqUcLPRLN
    • Lift the phone out of the back cover.

  3. MuDSBRGVmaw2EMlI
    MuDSBRGVmaw2EMlI
    2wHHtRyVPEnGcSXs
    ulqo1A4PRQoTUxs6
    • Use a spudger or fingernail to lift the battery starting at the notch on the bottom left.

    • Lever the battery out of its recess and remove it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery: Charge it to 100% and keep charging it for at least two more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.

Dominik Schnabelrauch

Member since: 23/11/16

167336 Reputation

0 comments