Introduction
Daughterboard cover prereq only
-
-
Insert a thumbnail, or spudger, into the notch on the bottom right to start separating the phone unit from the back cover.
-
Move to the bottom left corner and pry the phone unit out of the back cover until you can get a good grip.
-
-
-
Use a spudger or fingernail to lift the battery starting at the notch on the bottom left.
-
Lever the battery out of its recess and remove it.
-
-
-
Apply a spudger to the right side of the daughterboard cover.
-
Twist the spudger sideways to pry up the daughterboard cover until you get a good grip.
-
Remove the daughterboard cover.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
