Introduction

Use this guide to remove the back cover of the Motorola Moto E4 (XT1762).

  1. UynY2hJoXFVqfVet
    UynY2hJoXFVqfVet
    RJkQk1JxTHO4mOhC
    s3YaWwftYxyRsHTe
    • Power off your phone before beginning disassembly.

    • Insert a fingernail, or spudger, into the notch on the bottom right corner to start separating the phone unit from the back cover.

    • Move to the bottom left corner to pry the phone out of the back cover.

    I hve a question not a comment. I would like to know if this battery model will work in my moto E 4 Model # XT1775. Thank you.

    Gamaliel Gooding -

    This models battery is compatible with the Moto G4 Play, E4, and E5 Play:

    Motorola Moto G4 Play, E4, and E5 Play Battery - Genuine

    You’re probably looking for the Moto E4 Plus (XT1775) battery:

    Moto E4 Plus Battery - Genuine

    Tobias Isakeit -

    My US XT1768 did not have a notch here. I used my fingernails to pop the back cover off. Also, I followed this guide to successfully repair my US XT1768 in about 2 hrs. I’ve added a few comments below to point out the slight differences I found along the way

    Tom Bartol -

  2. w2XLjfi46aFfd1HD
    w2XLjfi46aFfd1HD
    3FblWACREvNC4yqL
    • Lift the phone out of the back cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dominik Schnabelrauch

Member since: 23/11/16

167336 Reputation

0 comments