Motorola Moto G6 SIM Card Tray Replacement

Written By: Tarun Thiruma
  • Comments: 2
Motorola Moto G6 SIM Card Tray Replacement

Difficulty

Very easy

Steps

2

Time Required

20 seconds

Introduction

Use this guide to remove the SIM card tray in your Motorola G6.

  1. neUWPJUbUbEowKJ3
    neUWPJUbUbEowKJ3
    stBbpOFSNuUtIc3F

    • Insert a paperclip or SIM card eject tool into the small hole in the SIM card tray on the right side of the top edge of the phone.

    • Press the tool into the hole to eject the tray.

    • This may require a significant amount of force.

    • The ejection mechanism is deeper in this phone than others and may require a longer SIM card eject tool. If your tool isn't long enough to reach the mechanism, try using an unfolded paperclip instead.

    The sim card eject tool has snapped inside the ejector hole,is there another way to get the sim card out ?.

    Amanda Ashley -

    You can try to carefully push the snapped pin with another ejector tool to eject the tray. Otherwise, lightly tap the phone edge to try to get the snapped pin out.

    Arthur Shi -

  2. M4WLxQRYTjGFlwJX

    • Remove the SIM card tray.

    • When reinserting the SIM card, ensure that it is in the proper orientation relative to the tray.

Conclusion

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Motorola Moto G6 Answers community for help.

Author

Tarun Thiruma

Member since: 20/11/19

32496 Reputation

0 comments