Introduction
Tools
Parts
- 
                  
                  
- 
            
Remove the plastic cover located on the back of the device by prying off one side of the cover with a plastic opening device and peeling it back.
 
 - 
            
 - 
                  
                  
- 
            
Pry the device apart by inserting a plastic opening tool in the seam between the plastic backing and display assembly. Use the tool to unclip the plastic tabs in between the backing and the display.
 - 
            
Pull the the plastic backing off the display assembly using your hands.
 
 - 
            
 - 
                  
                  
- 
            
Lift latch on front-facing camera connector.
 - 
            
Pull the connector toward the top of the device and remove the front-facing camera.
 
 - 
            
 
                            
                            Conclusion
                          
                          To reassemble your device, follow these instructions in reverse order.