Nikon CoolPix S5 Buttons Replacement

Written By: Patty Richeson
  • Comments: 0
Nikon CoolPix S5 Buttons Replacement

Difficulty

Easy

Steps

8

Time Required

10 minutes

Introduction

This guide is to be used to install buttons in the case that the buttons are damage or are no longer functioning properly due to overuse. A Phillips screwdriver will be needed to complete this installation.

  1. YPuPry5uskBsWTRX

    • Remove the wristlet by untying the strap.

  2. 4qIlvUucC4lYQGf6

    • Open the SD/Battery cover.

  3. MuUGtKVSXYbPrNLp
    MuUGtKVSXYbPrNLp
    MSNERUkGQByZvPYO

    • Remove the four screws adjacent to the SD/battery opening using a Phillips #00 screwdriver.

  4. 5yOJMNdWPaNWVx6C
    5yOJMNdWPaNWVx6C
    rPXCPYUTjYRCaPQP

    • Remove the side paneling of the camera by prying it off with your hands.

  5. fOEZeGI4gCZD6gVf
    fOEZeGI4gCZD6gVf
    WDZu3FEAJudjHJs5

    • Start on the wristlet side of the camera and use the #00 Phillips screwdriver to remove the two screws that hold the backplate in place.

    • Repeat the removal of the two screws on the other side of the camera.

  6. CdPKXChHG3eT4JGp
    CdPKXChHG3eT4JGp
    IJChEJmmO12c2Xtx

    • Separate the back faceplate from the rest of the camera.

  7. BNji6VFYlEJPMWLS

    • Using fingers, lift up button plate on the side closest to the LCD screen.

  8. HYN3LXytDymgn4F1

    • Pull on ribbon cables to disconnect ribbon cables.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Patty Richeson

Member since: 11/03/13

99 Reputation

0 comments