Introduction

If your battery isn't holding a charge or won't charge you may consider replacing the battery. Press hard and go slow on the screws in the back panel they are soft and strip easily.

  1. RHSiD64Y5wNXRkGt
    • Unscrew the two 3mm Phillips #0 head screws along the top edge of the device.

    • The screws on the back panel strip easily. Go slowly and press down firmly.

    • The screws on the back panel are held in by locking washers, so they won't come out of the back panel.

  2. pyUg6nSkGDKVCP3O
    pyUg6nSkGDKVCP3O
    kOxjUY5qGoETmTkf
    • Pull the top corner tabs of the front face plate outward and towards you.

    • Pull the faceplate up and out of the slots at the bottom of the device.

    • Set aside the back faceplate.

  3. IIi1SwaGDQqyIPpg
    IIi1SwaGDQqyIPpg
    PARFKZinVRBM4rsM
    YNIIJ4jiaWmyWtlG
    • Insert a plastic opening tool into the notch at the top of the battery.

    • Pry the battery up with the plastic opening tool.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tyler Starr

Member since: 06/10/16

1341 Reputation

One comment

The link to the Nintendo store to buy a battery no longer functions.

David Clarke -