Nintendo 3DS Wi-Fi Board Replacement

Written By: David Hodson
  • Comments: 1
Nintendo 3DS Wi-Fi Board Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

Wi-Fi board prerequisite guide.

  1. jBrYqTnBuAuWfLxA
    jBrYqTnBuAuWfLxA
    VovJlB5sgUp3CMYO

    • Slide the flat end of a spudger under the corner of the Wi-Fi board, and lift it away from the motherboard.

    • The Wi-Fi antenna cable is still connected to the Wi-Fi board, so you cannot completely remove the Wi-Fi board yet.

  2. SraCcIwGIBJJAuAp
    SraCcIwGIBJJAuAp
    LY3YrJcYkPo5gP6C
    EAUNvpGX54AVCRTt

    • Lift the Wi-Fi board off the motherboard and rotate it so that the bottom side is facing up.

    • Use the flat end of a spudger to pry the Wi-Fi antenna cable connector off its socket on the Wi-Fi board.

    • Remove the Wi-Fi board from the device.

    That moment you bought all your supplies and realise while removing the wifi chip the antenna is not plugged in because you forgot to plug it in last time……… Scew me…

    Sidney the wolf -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

David Hodson

Member since: 14/04/10

148306 Reputation

0 comments