Polaroid S7 Digitizer Replacement

Written By: Thiago Guedes
  • Comments: 0
Polaroid S7 Digitizer Replacement

Difficulty

Moderate

Steps

5

Time Required

10 minutes

Introduction

If your screen is cracked or it is not responding to touch, follow this guide to replace the screen.

  1. KOoMT5c3bSiDTeIy
    KOoMT5c3bSiDTeIy
    wwNPyONRa4tVmnkM

    • Insert the flat end of one of the plastic opening tools between the screen and the colored back cover. Gently pry apart the pieces.

    • Carefully separate the screen from the back, taking care not to rip the ribbons connecting them.

  2. SCEHekrBW4MlY6YX
    SCEHekrBW4MlY6YX
    YAJoND3Arql2I6Wo

    • Insert the plastic opening tool into the wedge and pry it open.

  3. eOhCurbwcs1r4cPG

    • Open the latch and pull to remove the LCD.

  4. DhkGZptOoNAiHEbw

    • After you remove the digitizer, open the latch and remove the screen.

  5. kIDMGnBJEoA4eY3R

    • To install the new screen, insert the digitizer into the new screen and latch them back in.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Thiago Guedes

Member since: 20/01/15

17 Reputation

0 comments