Introduction
Even a small tear can grow into a big problem when you are out in the wild and exposed to the elements. Fortunately, repairing a tear is simple. A few stitches can have your tent, or just about anything else with a tear, ship-shape in no time.
Parts
-
-
Thread your needle and tie a knot in the end.
-
Drive the needle from the back of the material, just before where the tear starts.
-
Pull the thread taut.
-
-
-
Take a small stitch, going in and out of the material, on one side of the tear only.
-
Pull the thread taut.
-
-
-
Take a small stitch, going in and out of the material, on the other side of the tear, directly opposite of the stitch you just took.
-
Pull the thread taut. This should cinch the material together.
-
-
-
Continue stitching, switching from side to side as described in step 2 and 3 of this guide, pulling the thread taut after each stitch.
-
Stitch until you come to the end of the tear.
-
-
-
One the last stitch, drive the needle through both sides of the fabric, taking as small of a stitch as possible.
-
Slowly pull the thread. As you pull, a loop will form. Draw the needle through this loop, and pull the thread taut.
-
Repeat this step, taking a tiny stitch, drawing the needle through the loop, and pulling taut.
-
Ensure that the stitches are tight, and cut any excess threads.
-
One comment
Have you seen this product? "fixmytear". It's a repair tape which sticks very well to vinyl, canvas, rubber, leather and most other surfaces. Absolutely life saving tape.