Replacing Creative Zen X-Fi Rubber Button Cover

Written By: Westley Courchene
  • Comments: 0
Replacing Creative Zen X-Fi Rubber Button Cover

Difficulty

Easy

Steps

2

Time Required

1 minute

Introduction

The cover is used for protecting the underlying circuit and contributing to the overall device's aesthetic.

  1. WXPPdUPvgd6bJdII
    WXPPdUPvgd6bJdII
    VMLOnCyGjCToyZwJ
    JkdVpSSaESiNCdIk

    • Using a spudger, wedge the tip between the front and back case to pry them apart.

    • Be careful to not apply excessive force since there are six fasteners on the screen's side that holds the cases firmly together.

  2. KuwbhQbJXG5uIOpk

    • The black rubber button pad can be removed by simply picking it up.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Westley Courchene

Member since: 13/01/15

3341 Reputation

0 comments