Samsung BD-F5900 WiFi Module Replacement

Written By: Louis McKean
  • Comments: 0
Samsung BD-F5900 WiFi Module Replacement

Difficulty

Easy

Steps

4

Time Required

10 minutes

Introduction

If there are any issues connecting to the WiFi with the device that can not seem to fixed, this simple guide explains how to replace the module. The only tool required is a #1 Phillips head screwdriver.

  1. BhLEkaXFMOyN2tWN

    • Using a #1 Phillips head screwdriver, remove the three 10mm screws on the back panel.

    • Tilt the back of the top cover forward to remove from chassis.

  2. VJtfGTBdWEsmk6Zl

    • Gently pull up on the ribbon cable by the blue tab to remove it from the power supply board.

  3. rvYMBrFYJBv1pRuy

    • Disconnect the WiFi board cable connector from the main logic board

  4. ai6YuQLgIVaIFOBu

    • Using a #1 Phillips head screwdriver, remove the 7.5 mm screw.

    • Slightly tilt the WiFi module sideways to remove from chassis.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Louis McKean

Member since: 18/10/17

501 Reputation

0 comments