Siemens Surpresso - Bosch Benvenuto back panel removal

Written By: VauWeh

Difficulty

Moderate

Steps

Time Required

No estimate

Introduction

Basic instructions: remove the back panel on the Siemens Surpresso - Bosch Benvenuto

Remove the seven Torx T10 screws on the rear panel.
Do not remove the back panel completely yet, the power switch is still connected.
Lift the back panel away.
Remove the two flat plugs from the inside of the power switch.

Conclusion

Follow the steps in reverse order to reassemble your device

Member since: 19/10/15

167120 Reputation