Siemens Surpresso - Bosch Benvenuto remove left side panel

Written By: VauWeh

Difficulty

Moderate

Steps

Time Required

No estimate

Introduction

Basic instructions: Removing the left side panel on the Siemens Surpresso - Bosch Benvenuto

The side panel is attached to the front edge with three bayonets. It must therefore be lifted out upward.
Grasp the side panel firmly at the rear edge and pull it backward and upward at the same time. It should come off quite easily.
When reassembling, make sure that the bayonets on the front edge engage properly.

Conclusion

Follow the steps in reverse order to reassemble your device

Member since: 19/10/15

167120 Reputation