Sony Handycam HDR­-CX220 Camera's Body Replacement

Written By: Keven
  • Comments: 0
Sony Handycam HDR­-CX220 Camera's Body Replacement

Difficulty

Moderate

Steps

5

Time Required

15 minutes

Introduction

This procedure only requires 2 tools and the most difficult part will be pulling the case off with your hands without breaking it.

  1. Qhhfjb2YwsCyGdle

    • Push in the battery indicator.

  2. e4QQHHAZGTbgIhXY

    • Slide the battery out of the slot.

    • To put the battery back in, line up the battery's metal part with the camera's and slide it in.

  3. yfFkAcWRscTf3J6s
    yfFkAcWRscTf3J6s
    pbAH5JIO5THqZedG
    DKW4eoFXihydQq1Q

    • Use the Phillips #0 screwdriver to remove the two 5mm screws.

    • Use the Phillips #0 screwdriver to remove the two 5mm screws.

    • Use the Phillips #0 screwdriver to remove the three 5mm screws.

  4. UCJuFCHUBbwt1Muo
    UCJuFCHUBbwt1Muo
    dPBDOeXFO6gbrqIx
    GVVihTqFvIKRYcGw

    • Use the plastic opening tool to loosen the plastic case of the camcorder.

  5. hWCtosvWZOAF455j

    • Use your hands to remove the plastic case.

    • Gently pull on the case not to damage anything internally.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Keven

Member since: 11/03/16

811 Reputation

0 comments