Introduction
The back cover of the Xiaomi Mi 4 is a crucial component of the mobile device that allows access to all other components of the phone. This guide will help in the removal of the back cover.
-
-
Use a pin or paper clip to insert in the hole on the side of the phone next to the micro SIM cardholder to remove the tray.
-
Remove the SIM card tray from the Xiaomi Mi 4 and store it somewhere safe.
-
-
-
Using the flat metal spudger and curved metal spudger, make a wedge between the plastic back cover and the inner frame
-
Using the second spudger, slowly work your way around the perimeter of the device
-
As the back cover is almost completely removed, use the suction-cup tool to remove the plastic cover without damaging the back
-
-
-
Use a 000 phillips head screwdriver to remove the 10 1.2mm phillips head screws in the plastic frame that hold the motherboard and battery.
-
Use a 000 phillips head screwdriver to remove the 3 0.5mm phillips head screws in the plastic frame that hold the motherboard and battery.
-
Use the small plastic opening tool and place it in the slot on the bottom right corner of the inner frame and carefully pry it off.
-
To reassemble your device, follow these instructions in reverse order.
