Zenbre SoundBank Z3 Bottom Cover Replacement

Written By: Cherian Thomas
  • Comments: 0
Zenbre SoundBank Z3 Bottom Cover Replacement

Difficulty

Moderate

Steps

3

Time Required

2 minutes

Introduction

Use this guide to replace the bottom cover of the Zenbre SoundBank Z3.

  1. bEs3xohC5XrWFdWu
    bEs3xohC5XrWFdWu
    hAmGA5BlfpGjYFAH

    • Power off the SoundBank Z3.

    • Turn over the device.

    • Peel the silicone feet up to remove.

    • No extra adhesive is needed to reapply the feet as long as the sticky side is not touched.

  2. nRARI5bJccdKDNoi

    • Remove all eight of the 11 mm Phillips screws from the bottom of the device.

  3. p4IaEujtU3SgmC4n
    p4IaEujtU3SgmC4n
    hhgRvEFjvbQS5YQe

    • Remove the bottom panel speaker using an iFixit opening tool.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Cherian Thomas

Member since: 25/03/16

334 Reputation

0 comments