iMac Intel 21.5" Retina 4K Display Fan Replacement

Written By: Evan Noronha
  • Comments: 0
iMac Intel 21.5" Retina 4K Display Fan Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

Prerequisite only.

  1. ZjTdOuevFThSNaSi
    ZjTdOuevFThSNaSi
    S4meAekVQZkISUTE

    • Gently pull the fan cable connector straight out of its socket on the logic board.

  2. MrmKPSuUCopatoYl

    • Remove the three 10 mm T10 Torx screws securing the fan to the rear enclosure.

    • The uppermost screw has a rubber standoff adhered to its head to support the display—leave this in place.

  3. NDv2oOiGvHmIAG6I
    NDv2oOiGvHmIAG6I
    igO3bWrtnsJMJ5QJ

    • Remove the fan from the iMac.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Evan Noronha

Member since: 06/02/15

219088 Reputation

0 comments