iPhone 11 Rear Case Replacement

Written By: Arty
  • Comments: 7
iPhone 11 Rear Case Replacement

Difficulty

Difficult

Steps

0

Time Required

1 - 2 hours

Introduction

Use this guide to remove all components from the rear case of your iPhone 11. This guide will show you how to remove speaker, cables, taptic engine, battery, logic board, and button covers so you can replace a dented or bent cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Arty

Member since: 27/10/19

15226 Reputation

7 comments

I really wish you had shown the size and kind of each screw and standoff.

I’m pretty sure I must have mixed them up a bit and now the screen doesn’t work.

A pic by pic instead of a video would have been awesome.

Kim Mace -

When you replace parts you always need to organize your screws the exact way you remove them… Mixing up screws will damage the motherboard. This goes for any repair.

Mason Miller -

So I've had an issue with a few iPhone 11 re-body jobs I've done. Out of about 30 that I've performed, two of them end up with an issue where the phone reboots randomly ever 2-5 minutes. (I've had to replace the phones outright for the customer.) It's not common but it is VERY frustrating.

Any idea what could be causing this?

TehachaScreens -

I myself have had this problem with a couple of iPhone XS Max’s. I’ve done many but those two had the exact same issue and I would love to know why. I hope someone answers this question. Good luck

Neil Borne -

You forgot all the upper pieces to remove?!?

Alexandre -

Na montagem da placa, percebi que o nfc não foi conectado.

Edson Alves -

HI,

Do you not connect the wireless charger coil to the logic board?

Many Thanks

Adam Lees -