iPhone 12 mini Pentalobe Screws Replacement

Written By: Dominik Schnabelrauch
  • Comments: 1
iPhone 12 mini Pentalobe Screws Replacement

Difficulty

Easy

Steps

1

Time Required

1 minute

Introduction

Use this guide to remove or replace the two screws securing the iPhone 12 mini display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

  1. JVwauFGp15pboki4
    JVwauFGp15pboki4
    6ZrVNyXTV2DYTb13

    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.7 mm-long pentalobe screws at the bottom edge of the iPhone.

    is it oem apple battery, because at some photo shows(Ifixit) and another shows (apple) ... wait your answer?

    karim -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Dominik Schnabelrauch

Member since: 23/11/16

167396 Reputation

0 comments