Amazon Fire 5th Generation Speaker Replacement

Geschrieben von: Amber Bunch
  • Kommentare: 1
Amazon Fire 5th Generation Speaker Replacement

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

15 Minuten

Einleitung

Use this guide to replace the speaker on the Amazon Fire 5th Generation tablet. This replacement is fairly simple but requires basic knowledge of solder and how to use a soldering iron.

  1. UARiCtkcZdyrM4GO
    UARiCtkcZdyrM4GO
    thKIHiluJZQ3gDeO

    • Ensure that your device is turned off.

    • Remove any micro-SD card that may be installed in the Fire. Failure to do so could damage the micro-SD card itself or the micro-SD card reader on the Fire.

    • While holding the device firmly, wedge the iFixit Opening Tool into the crease along the outer edge of the device (as shown in the image).

    • Slowly, grind the iFixit Opening Tool into the crease along the outer edges of the device until the entire back cover loosens.

    • Then, remove the back cover from the device.

  2. ahQyPl2cSF2XM15r
    ahQyPl2cSF2XM15r
    xWaNhJ4cJenFiAiK

    • Pry the speaker from the case using the iFixit Opening Tool.

    • Lift the speaker up from the device to remove the speaker wires from their groove in the case.

    • Be careful not to pull the speaker wires from the motherboard.

  3. 5DmMW2JNR6IhrUZb
    5DmMW2JNR6IhrUZb
    XamONYvjIljSUwPB
    MKLGCLLNCGPSxXK5

    This step is completely unnecessary. The cords don't get in the way of the rest of the procedure. Feel free to disregard this step.

    Jacob Dayley -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Amber Bunch

Mitglied seit: 10/02/16

1369 Reputation

0 Kommentare