Einleitung

This guide is going to help replace your speakers in the Archos 101 G9 tablet.

The purpose of the speaker is to produce audio output that can be heard by the listener. Speakers are transducers that convert electromagnetic waves into sound waves. The speakers receive audio input from a device such as a computer or an audio receiver. Some tablets have two speakers and stereo sound, some only have one speaker. When you get to Step 6 of this guide, you will be prying the speaker free from the case. As you desolder HP+ and HP- connections on the motherboard, make sure you are gentle with the connections.

  1. 4PhTBwtMlWWUjaGH
    • Place an iFixit opening tool in the crease where the display assembly and back of the device meet.

    • Slide the tool firmly through the crease on one side of the device, twisting as you go to create separation.

    • When you reach the corner, carefully pry the two halves of the device apart.

    • There are small clips along the edges that need to stay intact in order to properly reassemble the device. Be very gentle when prying so as not to break the clips.

    • Repeat for the remaining three sides and corners.

  2. TMj4SId1qMX3qtOq
    TMj4SId1qMX3qtOq
    dcPsCgHouLvCORhx
    • Separate the halves of the device.

    • Ensure that you separate from the top and you keep the bottoms of both pieces near each other so as not to damage the ribbon cables that connect the halves.

  3. SfXyEdGdUCWyP5ML
    SfXyEdGdUCWyP5ML
    M44QwVBmcvTCMmIG
    • Gently remove both ribbon cables from their sockets on the motherboard.

  4. 33VIbo31RHsjItXL
    • Remove the white and black coaxial cables with gold tips from the motherboard.

  5. TatI6blluUotkv2B
    • Remove the display assembly from the back panel.

  6. c6WCwCEsFQSgvbMu
    c6WCwCEsFQSgvbMu
    hTOQ4gxFHANThwSp
    • Pry the speaker free from the case using a nylon spudger.

  7. yTtSoFIVayL4biqm
    • Remove the tape covering the connections on the motherboard.

  8. pYJgSOGWhONQUbwl
    • Desolder the HP+ connection on the motherboard.

    • Desolder the HP- connection on the motherboard.

    • Be cautious when using the soldering iron.

    • Remove the speaker from the tablet.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Clay Meunier

Mitglied seit: 28/10/21

557 Reputation

0 Kommentare