Asus Vivobook Q301LA-BHI5T02 Motherboard Replacement

Geschrieben von: Caleb Ellis
  • Kommentare: 1
Asus Vivobook Q301LA-BHI5T02 Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

22

Zeitaufwand

20 - 25 Minuten

Einleitung

This guide will show the reader how to replace their failing motherboard with a new one. Other components are disconnected from the motherboard so they can be saved and reconnected to the new one. One of the most common signs of a failing motherboard is random restarts. If you are experiencing these often, a failing motherboard may be the culprit.

  1. 1l4YeTZhEwxmZZWe

    • Make sure the computer is turned off.

    • Flip the device over so that the back cover is facing you.

  2. lJG4TWMhysBQOLKW
    lJG4TWMhysBQOLKW
    3c36cGUlNbhQuocn

    • Remove the four 5mm Phillips #1 screws from the top of the laptop.

    • Remove the two 6mm Phillips #1 screws from the sides of the laptop.

    • Remove the four 2mm Phillips #1 screws from the bottom of the laptop.

  3. wojWGOaBqHDAEjtu
    wojWGOaBqHDAEjtu
    Z6uUvsON3wXA6r6N
    VcZPpsBmlHwrXgvK

    • Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place.

    Its not phisically possible if i will try harder the laptop will break in half

    Disturbed Asylum -

  4. phSl31F1akP5eaeN

    • Lift off the cover and remove the back cover from the device.

  5. nhp6SpZMCSuSUO25
    nhp6SpZMCSuSUO25
    RHP1GvhJYwkFSJJy

    • Using a Phillips #1 Screwdriver remove the six 3 mm screws keeping the battery in place.

  6. eLhECJRteUqvVHDW
    eLhECJRteUqvVHDW
    IUSwjusIKOUFWmA6

    • Unplug the battery connector from the mother board.

  7. OUSAd2dTCsWuxuwn
    OUSAd2dTCsWuxuwn
    FQObtkOfZf4Kl3DD

    • Gently remove the battery from the slot.

  8. HOVIK1Ngvixwoqh3
    HOVIK1Ngvixwoqh3
    D424NyFEYKR3quyj
    IcOI11RyfqTmj4w6

    • Unplug the two small cords connected to the wifi card.

  9. 5KeVpmhhGMnW4cDa

    • Using a Phillips #1 Screwdriver unscrew the 2 mm screw holding the wifi card in place.

  10. EVLDiWrVEIIjFjh2
    EVLDiWrVEIIjFjh2
    CBFH1OCEhiShIP5D
    S3XDoTuVfxuBnqUR

    • Unplug the Wi-Fi card from the motherboard and remove it from the device.

  11. HEBxOaC1LSo66tek
    HEBxOaC1LSo66tek
    PITHTVZW1v1NJNXd
    hLljQ411hoZuut4b

    • Using a Phillips #1 Screwdriver remove the three 3 mm black screws and four 2 mm copper screws holding the fan and heat sink in place.

  12. pYnMGt2OKFoV1BGA
    pYnMGt2OKFoV1BGA
    YvIaiWtKkFmPTOBG

    • Remove the wire connecting the fan to the motherboard.

  13. WTtrIQbye3dgXXC1
    WTtrIQbye3dgXXC1
    kuktQAvG1CcxxcGD

    • Gently remove the fan and heat sink from the motherboard.

    • On reassembly, be sure to clean the CPU and heat sink and reapply thermal compound to the CPU. Follow this guide to learn how.

  14. 6AyfJ1Nl2mGmUyGW
    6AyfJ1Nl2mGmUyGW
    GbnvEZHqFPXs4chi
    UT4TcpK5lWv6y4XT

    • Remove the top covering the RAM chips.

  15. 1s5Y4VrE3LeZFX3A
    1s5Y4VrE3LeZFX3A
    R6ajtsjcgX2LpYhu
    6LfJLAFuYOpBtVRN

    • Gently push the RAM chip holder to the sides.

  16. VB3vCehRxWKHWLvF
    VB3vCehRxWKHWLvF
    Wsql4SV6WvyvVjsn
    sSNSgtCm4BRgB6TC

    • Remove the RAM from the device.

  17. u5GcCMtGrbMJkHwk

    • Remove the four 4.0 mm Phillips #1 screws shown.

    • Remove the two 5.0 mm Phillips #1 screws shown.

    • Remove the three 3.0 mm Phillips #1 screws shown.

  18. SO1SFypeAqTgWRMU
    SO1SFypeAqTgWRMU
    mhCBQERlBAgZBjwZ

    • Using a plastic opening tool, pry open the hinge shown until your fingers can fit under it.

    • Pull the hinge the rest of the way up.

  19. 2gLkZcYncvUsBMAB

    • Disconnect the motherboard from the two connectors shown.

  20. bYX6sPQcydkiRfXV

    • Disconnect the motherboard from the connector shown.

  21. i6bbI1VLEKjRPtZ6

    • Pull the motherboard loose.

  22. nWCpFwbJgXSe2bGW

    • Disconnect the motherboard from the connector shown and it is now removed from your device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Caleb Ellis

Mitglied seit: 06/11/18

133 Reputation

0 Kommentare