Einleitung

Use this guide to replace the battery in your Dell Inspiron 3501 Laptop.

For your safety, discharge the battery below 25% before disassembling your device. This reduces the risk of fire if the battery is accidentally damaged during the repair. If your battery is swollen, take appropriate precautions.

  1. 5yImEDUUjKUJYss2
    5yImEDUUjKUJYss2
    YVcxjdYT5AdWxHGK
    • For your safety, discharge the battery below 25% and power down your device before disassembly.

    • Use your Phillips screwdriver to remove the seven screws securing the back cover:

    • Three 5 mm-long screws

    • Four 7.5 mm-long screws

    • Loosen the three captive screws.

  2. OjvWJUL1qMSTsA1E
    OjvWJUL1qMSTsA1E
    wyZYoOWbUo1rFM65
    • Flip the laptop upright and open the lid so that the keyboard is exposed.

    • Insert an opening pick between the front right corner of the back cover and the chassis.

    • Pry upward to release the retaining clips holding the cover.

    • You'll hear clicks whenever a clip is released.

    • Repeat this procedure for the opposite corner.

  3. gWOfGWq3HgK4Keqt
    gWOfGWq3HgK4Keqt
    WpYINlGYCuwSVonl
    • Insert an opening pick between the front edge of the back cover and the chassis, near the trackpad.

    • Pry upward to release the clips along the front edge of the laptop.

  4. HUY2eKZX5stXERKB
    HUY2eKZX5stXERKB
    NKxl4JQPbBAgOLGZ
    WpHaBfgT4oJyJPwR
    • Close the screen to the laptop and flip it over.

    • Pull the left side of the back cover away from the frame and remove it.

    • If your back cover is stuck to the chassis, use an opening pick to release the clips around the back cover's perimeter.

  5. 5SqTjDGRG23DrWfO
    5SqTjDGRG23DrWfO
    nVBlNdoLEhQEaElJ
    • Pull the tab on the head of the battery cable away from the socket to disconnect the battery.

  6. Zgc5pDw2VrNQ6yfp
    Zgc5pDw2VrNQ6yfp
    oDGjuwhU1QjBGYu3
    • Use a Phillips screwdriver to remove the three 3.3 mm-long screws securing the battery.

  7. nt5UGGDfKBuqYOco
    nt5UGGDfKBuqYOco
    2sfxXWSrkpschGEW
    B4rrQyhZt2iDDSda
    • Lift the battery straight out of its recess and remove it.

Abschluss

To reassemble your device, follow these instructions in reverse order.

For optimal performance, calibrate your newly installed battery after completing this guide.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Alex Diaz-Kokaisl

Mitglied seit: 16/01/22

69204 Reputation

0 Kommentare