DigiLand DL700D Battery Replacement

Geschrieben von: Justin Edwards
  • Kommentare: 0
DigiLand DL700D Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

10 Minuten

Einleitung

This guide will cover the disassembly and replacement of the battery for the Digiland DL700D. The battery is attached to the mainboard by soldered wires, so some soldering will be required. We recommend reviewing iFixit's soldering guide here.

  1. DcidFJ6EfqCCRMPP
    DcidFJ6EfqCCRMPP
    CiKHoy1Hr2KbpIhM
    1KyU3GKZL1DDpBeB

    • Remove the device's back cover using the plastic opening tool.

  2. SBTUQuOeZRQmR1Ks
    SBTUQuOeZRQmR1Ks
    SqoAALjlxKbyNlKV
    waSQYbI1kJbWha1E

    • Remove the three pieces of adhesive placed over the edges of the battery.

  3. 6lV4NQgOCDNihx42

    • Remove the wifi antenna from the bottom of the battery.

  4. FIGDVMCFuG21WndN
    FIGDVMCFuG21WndN
    2SkAWC6sRwQmtART
    tsEkNEfoHYa3OIaX

    • Heat up the soldering iron, proceed to desolder and remove the battery connections.

  5. oJ4qYlKvNbkqMIWm
    oJ4qYlKvNbkqMIWm
    cOvSUTkUJIIFTIhw
    Hm35bfZucpIMUZra

    • Remove the battery from the casing using a nylon spudger.

    • Be careful not to puncture the battery casing.

    • Carefully peel the battery free from the casing.

Abschluss

To reassemble your device, follow instructions in the reverse order. Apply new Kapton Tape and apply extra solder as needed.

Tinte & Feder

Justin Edwards

Mitglied seit: 29/03/18

241 Reputation

0 Kommentare