Garmin Nuvi 42LM Motherboard Replacement

Geschrieben von: Elina Zhukov
  • Kommentare: 0
Garmin Nuvi 42LM Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

35 Minuten

Einleitung

You will need to remove several screws and the battery in order to replace the motherboard.

  1. CiXOkOcyyQGiWpgU
    CiXOkOcyyQGiWpgU
    FRijYC1NK6blMZau
    lW3RKgSWMJpp512n

    • Remove the four screws on the back of the GPS using the T5 Torx screwdriver.

  2. mfumQvDivGCOFFo4
    mfumQvDivGCOFFo4
    UXBDEjKWa3xA4WEL
    WTWGnNDZWpi4CJDp

    • Pry the GPS open using a plastic opening tool.

    • When prying open the device, use caution to avoid damaging the motherboard.

  3. uJ1PfDBXMjnaPSh6
    uJ1PfDBXMjnaPSh6
    mALtwnjJ3fLMeSxk
    6ersbd2BvWTCiCg3

    • Using the T5 Torx screwdriver, remove the two screws located on the motherboard.

    • There are two screws - one in the back and one in the front.

  4. DTYKEQSh513hRF6R

    • Move the motherboard from from its designated location on the GPS.

    • Do not pull on red, green, and black cables when repositioning the motherboard.

  5. 1dQuy1obrdAHVuEO
    1dQuy1obrdAHVuEO
    YWo1ft5McfdBsUm1

    • Gently unplug the red, green, and black bundled cable to remove the battery.

  6. 1kyHroluJpTFAt2g
    1kyHroluJpTFAt2g
    yFASDX2TNTUQDxrN

    • Use blue plastic opening tool to carefully pry the battery from the GPS.

    • You might need to use additional force when prying because there is adhesive glue on the back of the battery.

  7. RExpMKRXBBOkRF5F

    • Using a soldering iron, desolder the black and blue wires connected to the motherboard.

    • Once the black and blue wires are desoldered, llift the motherboard out and away from the device.

    • Check out this awesome guide on how to solder and desolder connections.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Elina Zhukov

Mitglied seit: 18/01/17

558 Reputation

0 Kommentare