HP Stream x360 11 -p015wm Back Cover Replacement

Geschrieben von: DaisyHaskell
  • Kommentare: 0
HP Stream x360 11 -p015wm Back Cover Replacement

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

5 Minuten

Einleitung

Use this guide to replace the back cover of your HP Stream x360 11 -p015wm.

The back cover is important for protecting the internal components. A cracked or damage back cover can allow dust and moisture to damage hardware.

If the back cover is being removed to change the battery, click this link. While the back cover is removed, consider using these methods to clean internal hardware.

Before beginning, ensure the device is completely off and disconnect any external power source.

  1. luqm6GgKOFtSMCH5
    luqm6GgKOFtSMCH5
    XlMkVujwXnvRe5gi

    • Orient the laptop to have the back cover facing upwards.

    • Remove the four rubber pads located in each corner.

  2. PIqNUrd2nfkUmuLR

    • Tool required: JIS #1 Screwdriver

    • Using the screwdriver, remove all of the exposed screws.

  3. PhKC1LCWdUEighNi
    PhKC1LCWdUEighNi
    YgYDgecLr1h3J2jJ

    • Tool required: iFixit opening tool

    • Open the laptop and orient the keyboard facing upward.

    • Slowly wedge the opening tool into the gap between the keyboard and the back cover.

    • After loosening the back cover, close the laptop and orient the back cover facing upward. Open the cover.

  4. 2OQAWqospU3NPuIM
    2OQAWqospU3NPuIM
    CFPwb6JdOsF2ZRjL

    • This is a good time to clean any accumulated dust or debris. Use this link on tips for cleaning.

    • Tool required: Tweezers

    • Carefully use tweezers to remove the audio jack connector from the motherboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

DaisyHaskell

Mitglied seit: 15/10/18

683 Reputation

0 Kommentare