How to Remove Rust From a 2000 Honda Civic Door Handle

Geschrieben von: Henry Solares
  • Kommentare: 0
How to Remove Rust From a 2000 Honda Civic Door Handle

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

20 - 45 Minuten

Einleitung

Use this guide to remove the rust from your 2000 Honda Civic door handle.

A functional door handle and locking system will unlock the first time you click the unlock button. If you have to attempt to unlock it multiple times before it unlocks then this guide is for you.

Step 5 required a flashlight which is very useful for finding just where to apply WD-40.

  1. 1wI5tngFISVNHSZM
    1wI5tngFISVNHSZM
    D6lUViRoWdbOIjVY

    • Before beginning this guide, roll the window up of the door you will be working on, make sure the car is off, and put it into park.

    • Open the door you want to fix.

    • Use a heavy duty spudger to pry the door pull off.

  2. FKxcPNXaR3xDGJbJ
    FKxcPNXaR3xDGJbJ
    vSWFrEoQkq1tOlZt

    • Use a Phillips #2 screwdriver to remove three screws in the door pull and handle.

  3. ivpeyD1PvptI6fae
    ivpeyD1PvptI6fae
    BCuBHhvpEOQHEYka

    • Pinch the head of the cable connected to the door pull and gently remove it from socket, before taking off the door panel.

  4. FYaUtetYPFAgHMkU

    • To remove the interior door handle, carefully pull the plastic part that keeps the rod in place and turn clockwise, then pull the handle down and out.

  5. I1HajxkoXx1VdKXO
    I1HajxkoXx1VdKXO
    Pnu2P2TyQonwt6HE
    XffJtkgqyEUktRIp

    • Use your hands and grab the sides of the door panel and pull to disconnect the clips around the perimeter of the door interior until it becomes loose.

    • Lift the the door panel up slowly and over the lock.

    • Remove the door panel and put it to the side.

  6. JPZUAnbau2gYkmoH
    JPZUAnbau2gYkmoH
    TIdnrTAH1UwsXuRj
    OV22VKB5BqTHdvVo

    • When your take your door panel off there may be a plastic sheet where the red arrow is. Remove that as well (this car did not have one).

    • Put WD-40 on the parts that you can see that have rust or aren't working too well.

    • Look through the door panel with the window fully rolled up. Spray the exterior door handle spring with WD-40 also.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Henry Solares

Mitglied seit: 24/10/22

133 Reputation

0 Kommentare