How to Reset Your Schlage Connect to Factory Settings

Geschrieben von: Amy McElroy

Kommentare: 0

How to Reset Your Schlage Connect to Factory Settings

Schwierigkeitsgrad

Easy

Schritte

Zeitaufwand

5 - 10 Minuten

Einleitung

Is your Schlage Connect not working? You may need to reset the device to factory settings. Can't find the user guide for instructions? This guide will help you!

Device model: Schlage Connect BE469IR

Why this guide? This guide provides easy-to-follow steps to reset your device. No user guide is required.

What does this guide provide? Twelve quick steps to reset the device to factory settings without a user guide.

Note: Before resetting the device, you will need your device's original factory's preset user code. You can find this code either in the device's user guide or on the back of the device's inside cover. Steps 3-6 will show you how to do this without the user guide.

Need Additional Resources? Go to Schlage's YouTube Channel.

Werkzeuge

Phillips #0 Screwdriver

Schritt 1

Ensure the latch is retracted (not locked).

Schritt 2

Remove the battery cover by sliding the cover upwards.

Schritt 3

Using a Phillips #0 screwdriver, remove the bottom screw and top screw.

Schritt 4

Carefully remove the device from the door.

Schritt 5

Locate the programming code behind the alarm device.
You will need the original factory's preset user code (listed on the back of the device) for Step 12.

Schritt 6

Reattach the alarm device to the door by screwing the bottom and top screws.

Schritt 7

Disconnect the battery.

Schritt 8

Discharge residual electricity by pressing the exterior Schlage button three times on the keypad.
Performing this step ensures that any residual electricity left in the battery is removed.

Schritt 9

Press the Schlage button and continue pressing while at the same time reconnecting the battery.
You should see three green check marks on the lock's face.