Infant Optics DXR-8 Charging Port Replacement

Geschrieben von: Donovan Zusalim
  • Kommentare: 7
Infant Optics DXR-8 Charging Port Replacement

Schwierigkeitsgrad

Difficult

Schritte

7

Zeitaufwand

20 Minuten

Einleitung

  1. GOcvjwfgMcdXpsse
    GOcvjwfgMcdXpsse
    ZsNhD23SUDoHGrU5
    jT1ghDUBpspqWsjW

    • Using the plastic opening tool, remove screen protector from front of monitor.

    There's a layer of adhesive between the screen protector and the white plastic behind it.

    Jared Astillero -

    The cover is glued on. So you’ll nee d quite a bit of force to bend it up. But then it’ll come lose glue point by glue point. At first I was afraid that I’ll break it.

    Marco Smolla -

  2. N5QZknKvCQOlQXcL
    N5QZknKvCQOlQXcL
    GhBMVduKGErGhmVM
    lI14wgJlKmQ6WYFx

    • Remove the six 4mm screws using a Phillips #00 screwdriver.

    • Remove the screen, exposing the circuit board.

    • Turn device over to expose rear circuit board.

  3. eZKvBkxC6t3jITrS
    eZKvBkxC6t3jITrS
    PhVBd2P6MqTojxIG
    dGHmHmoHMHY1YTkv

    • Disconnect speaker from monitor for ease of access by unplugging wire.

    Thank you so much for this - and thank you to the commenter who walked through the additional screen replacement steps! I’ve never done anything like this and I managed to replace the screen myself.

    Lauren Skinner -

  4. 1v2hFUenPfAyMEAL
    1v2hFUenPfAyMEAL
    NYSBhsQGAMaBw6wj

    • Unscrew the four 3 mm screws holding the motherboard to the unit using a Phillips #00 screwdriver.

  5. 2ZTIYTtPWJdZdTh4
    2ZTIYTtPWJdZdTh4
    EhDfNFApJf5KHctS

  6. I4iFLfRmCvyFIk51

    • Remove the old charging port and solder the new one in place.

  7. mOgmxNPDGkbrDQYK

    • Flip the unit over to ensure a correct fitment.

    Where do you buy a new charging port? Also, you didn't include new charging port as an item that is needed for this tutorial. Might be self-explanatory but why say "no parts required" when clearly a part is required?

    In any event, thanks for this tutorial. Much appreciated!

    Paul Lee -

    The part you are looking for is a female Micro USB B-Type solder socket. I no longer have the unit available to confirm, but I'll bet you could contact Infant Optics and confirm with them. Sorry I can't be of more help!

    Donovan Zusalim -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Donovan Zusalim

Mitglied seit: 25/01/17

285 Reputation

2 Kommentare

I appreciate you posting this. What kind of new charging port did you use (USB type, size, etc) and does IFIXIT sell them?

John Lynch -

The part you are looking for is a female Micro USB B-Type solder socket. I no longer have the unit available to confirm, but I'll bet you could contact Infant Optics and confirm with them. Sorry I can't be of more help!

Donovan Zusalim -