Einleitung

If the battery in your Lenovo Flex 6-11IGM (model #: 81A70005US) has lost its ability to hold a charge or can no longer power your device, you can follow this guide to replace it.

The battery must deliver a large amount of energy to the device in order to power it. This energy is stored in its chemical form inside the battery. Because of this, the internal components of the battery are volatile and dangerous if damaged. Be sure to use caution when removing the battery and keep it away from any excessive heat sources once removed.

Before beginning, make sure you power off the device, allow it to discharge over the course of a couple days, and make sure the laptop is closed for an easier and safer replacement.

  1. JQybQ3VEJaLkivw4
    • Flip the device over and lay it down with the underside facing upwards.

  2. VHdKpKITEMOIIulT
    VHdKpKITEMOIIulT
    sVADqyHHY15KxjpX
    • Remove the ten screws with a Phillips #00 screwdriver.

  3. KSqEhDCxbMQBxo2N
    • Using a plastic opening tool, make your way around the edge of the laptop.

  4. LBPTioxNFYqq4DBU
    LBPTioxNFYqq4DBU
    bEVRNpiPiMtj5Zin
    • After making sure the back panel is completely free from the body, remove the back panel.

  5. UTpJZ5aUlDr2HAA5
    UTpJZ5aUlDr2HAA5
    FkrHCLKktyonbyeL
    • Remove the five 3.9 mm Phillips #00 black screws holding the battery in place.

  6. PyMGmPYeiOwRlGuB
    PyMGmPYeiOwRlGuB
    KbRyGQXolTsTweFl
    3KJgKvbQXkqqmuX6
    • Pull out the multicolored connecting cables using an iFixit opening tool.

  7. hXB4RwRUXnvlsyV2
    • Remove the now disconnected battery from the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Dustin Healy

Mitglied seit: 23/01/20

241 Reputation

0 Kommentare