Einleitung
If you notice the LED lights on your device are continuously blinking or not working at all, this step-by-step guide will show you how to replace them individually, or all together. For soldering help, follow the How to Solder and Desolder Connections guide.
Werkzeuge
-
-
On the circuit board, locate the LED light you wish to replace.
-
On the bottom of the board, each LED is designated with a small triangle with a line at one tip and a label of LED1, LED2, etc.
-
-
-
Desolder the two LED leads to the specific bulb.
-
Remove the LED from the circuit board.
-
Properly install the new LED and solder to the board.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
