Palm TX Battery Pack Replacement

Geschrieben von: Spencer Lewson
  • Kommentare: 1
Palm TX Battery Pack Replacement

Schwierigkeitsgrad

Difficult

Schritte

6

Zeitaufwand

10 - 15 Minuten

Einleitung

Outline what you are going to teach someone how to do.

  1. SFqUJpIxgUDWqMDg
    SFqUJpIxgUDWqMDg
    eScJPtslX1VtsP5Z

    • Orient the device so that the display faces forward.

    • Remove the stylus from the right side.

  2. cU3agxDMnT5RnWAM

    • Turn over the device so that the back panel faces forward.

    • Use a T5 Torx screwdriver to remove the four 6.35mm corner screws.

  3. xfoRukNaUfI1RLXB
    xfoRukNaUfI1RLXB
    K2hSQNYTu2BmokBO

    • Rotate the device so that the display faces forward.

    • Insert a plastic opening tool with the angled tip pointing downward into the crevice on the left side of the device.

    • Pry along the crevice to loosen the back panel.

    • Repeat this process for the right side.

  4. RVnJ6LRyWDeAW2Bq
    RVnJ6LRyWDeAW2Bq
    adjBVeEfOplaNhMp

    • Carefully pry the back panel to open the device.

    • Be careful not to break the wire that connects the battery pack to the motherboard.

    • When reassembling, snap the back panel back into place and then insert the top cover.

  5. mKT1vZ2xqFrEwSUs
    mKT1vZ2xqFrEwSUs
    RByTDfhlQgNr6HNZ

    • Use a plastic opening tool to peel the battery pack from the back panel.

    • The battery pack is glued to the back panel so removing it may require considerable effort.

  6. FQW1IOAbK6pZSIwD
    FQW1IOAbK6pZSIwD
    mucXYAiugnNA6YgE

    • Use a soldering iron to disconnect the battery wires from the motherboard.

    • For soldering instructions, you can view the Soldering Guide.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Spencer Lewson

Mitglied seit: 19/01/11

778 Reputation

Ein Kommentar

In step 1 - Also remove the cover hinge by sliding downwards

In step 3 - there are actually 2 crevices on the left side of the device. Use the larger, which originally held the cover hinge (the smaller crevice seems to remove the facia)

Jack -