Power Removal

Geschrieben von: Connor Sweeney
  • Kommentare: 3
Power Removal

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

5 - 10 Minuten

Einleitung

In order for you to remove components with power supplied to them, you need to remove the power from the device by disconnecting from the main power source.

  1. GhJQoIbNCVS23m6C
    GhJQoIbNCVS23m6C
    HQtJv5BXnYfeGPK1
    WLYiYaRQMwUu6Akv

    • Before working on the device, make sure the device is off and not plugged into any power source for safety reasons. Failure to comply could result in injury.

    • Place the device on a firm surface with the device screen facing down.

  2. 6Mudg4HcDSTxhOBX
    6Mudg4HcDSTxhOBX
    vHPxINmpN3ZSRSPi

    I just checked and there are no screw holes on my Insignia 11.6” tablet!

    Mugsys RapSheet -

  3. Im3eqAXndT4QjKnn
    Im3eqAXndT4QjKnn
    WaDHvRxZKVCuCKAB
    3s3RGwQQFQ64IN36

    • Using a plastic tool and the plastic card, gently pry off the back cover.

    How many locking tabs are there? I see one in the corner.

    Mugsys RapSheet -

  4. KJKOp6m1tiL3kBpM
    KJKOp6m1tiL3kBpM
    OQPu315rJWCiWaWB
    oJSaTIWqXuuVPVu4

    • Using tweezers, remove the electrical connector that connects to the battery to remove the power to the battery.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Connor Sweeney

Mitglied seit: 28/09/16

422 Reputation

Ein Kommentar

Thank you. It got me along to open my Venturer. Wish I could send a picture of the failure.

Tl Sn -