Einleitung
If your Razer Kraken Ultimate microphone is not properly picking up audio- sound is coming through distorted or it is not picking it up at all.
The headset picks up audio through a retractable microphone. A faulty microphone would cause the problems with picking up audio.
In Step 4 will require wire cutting and soldering to remove and reattach the microphone.
-
-
Once you have taken off one side, you can then remove the whole piece by slowly prying the pad away from the headphones.
-
-
-
Remove the 10 mm Phillips #00 screws securing the left speaker.
-
Note that one of the screws is hidden behind the product information sticker. Use your screw driver to punch a hole in the sticker.
-
-
-
To fully detach the speakers cut the wires as close as possible to the connection point, leaving plenty of room to solder the new speaker on.
-
-
-
Open up the casing the microphone retracks into.
-
Cut the cable as close to the microphone as possible, leaving behind enough to solder the new microphone to.
-
To reassemble your device, follow these instructions in reverse order.
